 The GAG-2 is designed to
deliver greater thrust with lower motor current requirements. This versatile, gear-driven actuator provides shiftable loads up to 1,740 lbs (789 kg), with maximum motor draw of 1.3 Amps. It has a gearing ratio of 6:1, with maximum shifting speeds of 0.61 inch/sec (15 mm/sec). Standard actuator strokes range from 1” to 12” (25 mm to 305 mm). Ball screw and nut design provides low-friction, efficient operation and eliminates the typical end-of-stroke sticking and/or the need for actuator limit switches. For use with Fife’s CDP-01 or CSP-01 processors, this actuator is widely used for steering guides, displacement guides, positioner assemblies, slaving, chasing applications, and unwind/rewind applications.
Key Features:
- Gear-driven actuator with shiftable loads up to 1,740 lbs (789 kg).
- Clean, electronic operation.
- Durable construction for continuous-duty reliability.
- Nonsticking end-of-stroke design.
- No limit switches required.
- Compatible with all Fife automated guiding and positioning equipment.
- Sized and configured to your requirements.
Additionals Specifications:
Maximum Shiftable Load:
1,740 lbs (789 kg) (using antifriction bearings)
Maximum Design Thrust:
300 lbf (1,334 N)
Maximum Shifting Speed:
0.61 inch/sec (15 mm/sec)
|
